Hot-Swap Pci Slots; Attention Indicator - MAXDATA PLATINUM 7200 IR User Manual

Hot-swap PCI Slots

The two hot plug PCI slots have power and attention LEDs. The attention button is used to invoke a
hot-plug sequence to remove or add an adapter without having to use the software interface. They
are identified by the green arrow on the PCI divider label. The status of the LEDs is shown in Table
7 and Table 8.
Table 7. Power Indicator
Green Power LED State
Off
On
Blinking
Table 8. Attention Indicator
Amber Attention LED State
Off
On
Blinking
/
NOTE
If you hot-remove a PCI card without following the proper procedure, power will automatically be
turned off to the slot.
4 4
Definition
Power off: Power has been removed from the slot. A card can be
inserted or removed.
Power on: The slot is powered on. A card cannot be inserted or
removed.
Power transition: The slot is in the process of powering up or down. A
card cannot be inserted or removed.
Definition
Normal: Normal operation
Attention: Power fault or operational problem has occurred with this
slot.
Locate: The slot is being identified at the user's request.
Platform Description Platform Description