Deleting Tracks; Factory Settings ("Reset") - Silvercrest CRE-521 Instructions Manual

Copying from an MP3/WMA CD onto an SD/MMC card or USB removable storage device
If an MP3 and/or WMA CD is inserted into the CD slot and the "DIS/REC" button
device will start the copy mode for the respective track. If more than one storage medium is available on the device, a selection
menu will appear.
To select the storage medium that should be used for the copy, press the "DIS/REC" button
is indicated. The copying process is started by pressing the "BAND" button
number that indicates the process of the copying. The message "M.CARD" or "USB" will begin flashing on the display.
the end of the copying process, the device will play the subsequent track.
To stop a current copying process, press the "DIS/REC" button
Note:
Please keep in mind the legal regulations applicable at your whereabouts pertaining to the production of copies of copyright-
protected materials. If you have any doubts, please consult a specialist near you.

17.4 Deleting tracks

During the playback from an SD/MMC memory card and USB removable storage device, it's possible to delete the current track
from the data storage medium. To do this, press the "DIS/REC" button
respective track. "DELETE" will appear on the display. To delete the track, press the "BAND" button
removed from the data storage medium. Afterwards the device will continue with the playback of the subsequent track.

17.5 Factory settings ("RESET")

By using the reset function, the device can be changed back to the factory default settings.
To use the reset function, please press the button
the button on the device with a thin, sharp object. The device will then be reset and turned off if required.
Note:
When the factory settings are restored, the clock and the stored radio stations will also be reset or erased
40
. "COPY" will appear on the display along with a
for more than three seconds. The copying process is stopped.
for more than three seconds during the playback of the
on the device. Then the operating unit automatically flips down. Now press
is pressed for more than three seconds, the
until the desired storage source
. Then the track is
After