Silvercrest CRE-521 Instructions Manual page 37

Mp3/wma/ogg
Table of Contents

Advertisement

"LOUD": Sound setting – Loudness
The "LOUD" function makes it possible to emphasize low and high frequencies through the push of a button in order to increase
sound perception in an adjustment to the respective volume.
To activate the "LOUD" function, press the control dial
the control dial
repeatedly until you get to the menu item "LOUDNESS". There you will have the option of activating ("LOUD
ON") or deactivating ("LOUD OFF") the function by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
When the "LOUDNESS" function ("LOUD ON") is activated, the message "LOUD" appears on the display. This is turned off
after deactivation.
"LOC": Distance setting for the station search
The "LOCAL" function is relevant for the station search. Here it can be selected whether only local, strong stations ("ON") or also
weaker, more distant stations ("OFF") are searched for.
To get to this menu item, press the control dial until menu level 2 is reached. The "INVOL" function will appear. Now briefly
press the control dial until you reach the menu item "LOCAL". You can choose between "ON" or "OFF" by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is active.
"STEREO": Switching between stereo and mono playback
This menu item gives you the option of selecting between stereo and mono playback.
To reach the menu, press the control dial
the control dial
repeatedly until you reach the menu item "STEREO". There you will have the option of selecting between
"MONO" and "STEREO" by turning the dial.
until menu level 2 is reached. The "INVOL" function will appear. Press
until menu level 2 is reached. The "INVOL" function will appear. Now briefly press
English
or through automatic storage
, you
or through automatic storage
, you
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents