Rds; Traffic Announcements ("Ta", Traffic Program "Tp") - Silvercrest CRE-521 Instructions Manual

Information about the current station
In order to show information about the current station, please press the "DIS/REC" button. The desired information will then be
shown to you in the following sequence: current time, PTY, frequency of the current station.
Show current time
In order to show the current time, please press the "DIS/REC" button. Then the current time will be displayed to you.
Note:
If the device receives an RDS station with an RDS time signal, the clock will be automatically updated at particular intervals.

13.4 RDS

RDS is an information system whose signals are additionally broadcast by most FM stations. With RDS programs, the name of
the programme appears as an abbreviation on the display. Further information, such as frequency, time and program type
(PTY) can be faded in. An RDS programme will be broadcast by several stations on different frequencies (alternative
frequencies). If an RDS programme has been selected, the device automatically switches to the alternative frequency that can
be received most clearly, as long as that is available and the AF function (section 13.6) has been turned on.
In order to access the RDS information, repeatedly press the "DIS/REC" button
will appear in sequence on the display.

13.5 Traffic Announcements ("TA", traffic program "TP")

To activate the traffic announcement program, please press the "TA/TP" button
display and the readiness for announcements is turned on.
To deactivate the traffic announcements, press the "TA/TP" button
for announcements has been switched off.
Note:
If the selected station is not a traffic broadcast station, the device automatically starts to scan for the next traffic broadcast
station.
If "TA" is turned on, the CD, SD-MMC, USB and AUX-IN operation is interrupted for a traffic announcement and will be
continued afterwards. For the duration of the traffic alert, "TRAFFIC" will appear on the display. During AUX-IN operation,
the current track will not stop but continue playing. To stop the device connected via AUX-IN, please consult the manual of
the respective manufacturer of the device.
22
. The time, program type (PTY) and frequency
briefly. The message "TA" will appear on the
again. The message "TA" disappears and the readiness