Selecting Sd/Mmc As A Program Source; Mp3 Functions; Searching For Track Numbers - Silvercrest CRE-521 Instructions Manual

Note:
Never use force when inserting an SD/MMC card; this could damage the device as well as the card. Also prevent direct skin
contact with the contacts on the card to prevent contact problems .

15.5 Selecting SD/MMC as a program source

To play back audio tracks from an SD/MMC memory card, press the "MODE" button
Then the device will read the music tracks that can be reproduced from the memory card and begins to play back the first track.
Note:
The program source "SD/MMC" can only be selected through the "MODE" button
reader. When you remove the SD/MMC card from the device, the device automatically switches back to the most recently
selected program source.

15.6 MP3 functions

Below are descriptions of the functions and displays when an MP3 CD is inserted, an MP3 player / USB storage device is
connected, or when an SD/MMC memory card is inserted.
When the MP3 data is read, the total amount of folders and tracks will briefly appear on the display. This is followed by the
playback. During the playback, the display will alternately show the folder name, track name, and the name of the artist.

15.7 Searching for track numbers

When searching for track numbers, you have the option of quickly getting to the desired track number.
To start searching for track numbers, briefly press the "AS/PS" button. The message "001" will appear on the display, whereby
the last digit is flashing. A maximum of three digits are available for the search. By turning the control dial
last digit of the search entry and confirm it by pressing the control dial
by turning the control dial
button at the start of the search, the device selects the desired file and plays it back.
If you don't need the second and/or third digit for the search, just leave these settings unchanged and begin searching with the
"Band" button .
and confirm by pressing. Proceed with the third digit in the same way. If you press the "BAND"
to select "M-CARD" as the data source.
if there is an SD/MMC card in the card
. Now the centre digit is flashing. You can also set this
English
you can select the
29