Archive Start Position Reset; Audio Recording - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT REC LPA
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
>> ARCHIVE SOURCE HDD

ARCHIVE START POSITION RESET

This setting is appeared when "ARCHIVE•COPY"
is selected on "ID4•ID5" of the <INITIALIZATION>
screen, and the "HDD SETTING" is selected on "PAR-
TITION" ("LONG PRE-ALARM").
Settings ( default : "MAIN" )
"MAIN" : Archive MAIN HDD only.
"SUB" : Archive SUB HDD only.
"LPA" : Archive LPA HDD only.
"LPA" is appeared when "LONG PRE-ALARM"
is selected on "HDD SETTING" of the <INITIALIZA-
TION> screen after installing EXTRA HDD to "IN-
TERNAL HDD A".
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "ARCHIVE SOURCE HDD" in
the <HDD SETTINGS> screen, and display the desired setting.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Press the ARCHIVE button.
• The ARCHIVE device commences archive.
ARCHIVE START POSITION RESET
The unit automatically keeps track of the end point of HDD
archive. This function is used to reset this ARCHIVE POINT.
After reset, the ARCHIVE POINT returns to the position of
the earliest stored data.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT REC LPA
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
ARCHIVE SOURCE HDD
>> ARCHIVE START POSITION RESET
This setting is appeared when "ARCHIVE•COPY" is
selected on "ID4•ID5" of the <INITIALIZATION> screen.
Confirm that the peripheral recording device is
correctly connected to ID4 or ID5, and "ARCHIVE•
COPY" is selected on "ID4•ID5" before making AR-
CHIVE START POSITION RESET settings.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET UP/
INFORMATION> } Select "ARCHIVE START POSITION RESET"
in the <HDD SETTINGS> screen, turn the SHUTTLE ring clockwise.
• The <ARCHIVE START POSITION RESET> screen is
displayed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ON
OFF
OFF
OFF
OFF
OFF
2. Turn the SHUTTLE ring clockwise.
OFF
MAIN
• The ARCHIVE POINT is reset.
Points to be careful of regarding archive
• When archive is performed during record, an image
may not be recorded at the time of an archive start and
an end. Be careful.

AUDIO RECORDING

This unit can simultaneously record audio along with the
video. When recording audio, the continuous recording time
becomes shorter than when recording only video.
Setting ( default : "OFF" )
"ON" : Records video and audio.
"ALARM" : During alarm recording or emergency re-
cording, records video and audio.
"OFF" : Does not record audio.
1. Press the SET UP button } <SETTINGS> } Select "AUDIO
RECORDING" in the <INITIAL SET UP/INFORMATION>
screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
ON
OFF
When setting "AUDIO RECORDING" to "ON", a
OFF
OFF
speaker display (
OFF
able time display in the <RECORD SETTING> and
OFF
OFF
<RECORD SETTING A> ~ <RECORD SETTING
MAIN
D> screens.
Even when setting "AUDIO RECORDING" to
"ON", audio cannot be recorded for the following
settings.
<ARCHIVE START POSITION RESET>
>>EXECUTE
<INITIAL SET UP/INFORMATION>
HDD SETTINGS
>>AUDIO RECORDING
REAR TERMINAL SETTINGS
COMMUNICATION PORT SETTINGS
CAMERA CONTROL
INFORMATION/SERVICE
PASSWORD
LANGUAGE SELECTION
) appears to the right of record-
<RECORD SETTING> 2/2
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS
>> 10 1.563P STD 1.563P STD
11
1.563P STD 1.563P STD
12
1.563P STD 1.563P STD
13
1.563P STD 1.563P STD
14
1.563P STD 1.563P STD
15
1.563P STD 1.563P STD
16
1.563P STD 1.563P STD
PRE ALARM REC ( S )
SHUTTLE<<:BACK
<ESTD REC> D H
OFF
A-GRADE
S
M
51