Camera Control; Information/Service; Hdd Information/Archive/Copy; Information/Cfc Information - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

9. When the setting is altered, the unit turns off automatically
and the setting will renew.

CAMERA CONTROL

Select here the protocol control of dome camera con-
nected to each camera number to set address.
The optional remote control R-2500 is required to
control cameras.
Setting of "PTZ CONTROL"
"PELCO-2400" : PELCO "D"PROTOCOL 2400bps
"PELCO-4800" : PELCO "D"PROTOCOL 4800bps
"PELCO-9600" : PELCO "D"PROTOCOL 9600bps
"A.D." : American Dynamics RS-422/RS-485 protocol
4800bps
"OMIKRON" : OMIKRON protocol converter 192000bps
Setting of "ADDRESS" ( default : "001" )
"001", "002", • • • • • • • • •, "127", "128"
Please set a "ADDRESS" setting as the same set-
ting as ADDRESS of a camera.
Please contact your sales agent for dealer.
1. Press the SET UP button } <SETTINGS> } Select
"CAMERA CONTROL" in the <INITIAL SET UP/
INFORMATION> screen and turn the SHUTTLE ring clockwise.
• The <CAMERA CONTROL> screen appears.
<CAMERA CONTROL> 1/2
<CAMERA CONTROL>
NO PTZ CONTROL
1
>>
2
3
4
5
6
7
8
9
NEXT PAGE

INFORMATION/SERVICE

The <INFORMATION/SERVICE> screen is used to
check log and device lists after power failure, and ini-
tialization the menu. The total operating time is displayed
on the 2/2 screen.
<INFORMATION/SERVICE> 1/2
<INFORMATION/SERVICE>
>>HDD INFORMATION
ARCHIVE/COPY INFORMATION
CFC INFORMATION
WARNING LOG LIST
RESET TO FACTORY SETTINGS
MAIN HDD DATA CLEAR
SUB HDD DATA CLEAR
LPA HDD DATA CLEAR
CFC DATA CLEAR
ARCHIVE DATA CLEAR
COPY DATA CLEAR
<INFORMATION/SERVICE> 2/2
<INFORMATION/SERVICE>
ELAPSED TIME: SYSTEM
HDD SETTING
PARTITION SIZE
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ADDRESS
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
(1/2)
(2/2)
3H
ARCHIVE 0H
COPY 0H
LPA
10%
The <INFORMATION/SERVICE> screen consists
of 2 pages. The second page is appeared by turning
the JOG dial clockwise when the cursor points out the
setting of the bottom of the screen.
"ARCHIVE/COPY INFORMATION", "COPY DATA
CLEAR", and "ARCHIVE DATA CLEAR" are appeared
on page 1/2 of the <INFORMATION/SERVICE> screen
when "ARCHIVE•COPY" is selected on "ID4•ID5" of
the <INITIALIZATION> screen.
"ARCHIVE" and "COPY" operating time are ap-
peared on page 2/2 of the <INFORMATION/SERVICE>
screen when "ARCHIVE•COPY" is selected on
"ID4•ID5" of the <INITIALIZATION> screen.
"SUB HDD DATA CLEAR" is appeared on page 1/
2 of the <INFORMATION/SERVICE> screen when
"PARTITION" ("LONG PRE-ALARM") is selected on
"HDD SETTING" of the <INITIALIZATION> screen.
"LPA HDD DATA CLEAR" is appeared on page 1/2
of the <INFORMATION/SERVICE> screen when
"LONG PRE-ALARM" is selected on "HDD SETTING"
of the <INITIALIZATION> screen.
"PARTITION SIZE" is appeared on page 2/2 of the
<INFORMATION/SERVICE> screen when "LONG
PRE-ALARM" is selected on "HDD SETTING" of the
<INITIALIZATION> screen.

HDD INFORMATION/ARCHIVE/COPY

INFORMATION/CFC INFORMATION

INFORMATION is used to check the connection status
of peripheral recording devices connected with inter-
nal HDD, the amount of available space in the HDD,
ARCHIVE/COPY devices connected to the unit, and
Compact Flash Cards inserted into the unit.
1-1. (To check HDD RECORD data • • • )
Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "HDD INFORMATION" in the
<INFORMATION/SERVICE> screen, and turn the SHUTTLE
ring clockwise.
• The <HDD INFORMATION> screen is displayed.
<HDD INFORMATION>
SCSI
ID0:HDD(120GB)
ID1:HDD(120GB)
ID2:NONE
ID3:NONE
ID4:NONE
ID5:NONE
MAIN START ---------- --:--:--
END ---------- --:--:--
SUB START ---------- --:--:--
END ---------- --:--:--
Recording start and end times of "SUB" area is ap-
peared when the "HDD SETTING" is selected on "PAR-
TITION" ("LONG PRE-ALARM") of the <INITIALIZA-
TION> screen.
The start and stop times in the "LPA" and "SUB"
range are indicated when "LONG PRE-ALARM" has
been set for "HDD SETTING" on the <INITIALIZATION>
screen after an additional HDD has been installed as
"INTERNAL HDD A".
INTERNAL HDD
A:NONE
B:HDD(120GB)
C:NONE
57