Monitor Display Settings And Playback Operation; Various Playback Functions; Simultaneous Playback During Recording - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

Various playback functions (continued)
2-2. Press the REV. PLAY (REVERSE PLAYBACK) button.
• The playback interval is changed to a slower setting (25P,
12.5P, and so on) each time the button is pressed.
Audio cannot be played back when changing the
playback interval.
Once the playback interval is changed, audio
will not be played back even when returning the play-
back interval to the original value. To playback au-
dio, pause playback and then play the video again.
Once the playback interval is changed, the green
display of the playback interval will remain un-
changed even when returning the playback interval
to the original value. To check the original playback
interval of the recording, pause playback and then
play the video again.
Altering the playback interval settings and then
performing a quick playback of data with long re-
cording time may cause discrepancies between ac-
tual recording time and the recording time displayed
on the screen.
When changing to the single display mode with
"2" or "3" set in "DISPLAY MODE" in the <TIME
DATE /DISPLAY SETTINGS> screen, the play-
back interval is displayed on the screen in green
for easy confirmation if the value is changed.
Monitor display settings and playback
operation
• Single screen : The screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording.
• SPLIT4, SPLIT9 : Each mini-screen will change frame by
frame at a rate equal to the recording interval multiplied by
the number of cameras used in the recording. The screen
display shift to still frame mode during playback from a cam-
era which is not indicated.
• SPLIT16 : Each mini-screen will change frame by frame
at the recorded interval. The screen display shift to still frame
mode during playback from a camera which is not indi-
cated.

Simultaneous playback during recording

The recorded data can be played back simultaneously
during the unit is recording.
The video being played back may pause tempo-
rarily or the sound may be interrupted.
Noise may be noticeable on the video during
shuttle playback.
Split screen display can be selected individually
for recording/playback.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
70