System Configurations For The Initial Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

System configurations for the initial setting

The following shows the system configurations for the initial setting, maintenance, and inspection.
Direct connection
(1)
(1) MES interface module
(2) Ethernet (twisted pair cable)
(3) Configuration personal computer
Connection via a hub
(1)
(1) MES interface module
(2) Ethernet (twisted pair cable)
(3) Configuration personal computer
(4) Hub
An MES interface module and a configuration personal computer can be connected directly or via a hub.
• For direct connection, the Ethernet port (CH1) of an MES interface module can directly be connected to a personal
computer on a 1:1 basis with an Ethernet cable (twisted pair cable) without a hub. Connection can be established without
specifying the IP address of an MES interface module.
• For connection via a hub, the IP address of an MES interface module needs to be specified.
• For initial setting, only Ethernet port (CH1) can be used.
For using the Ethernet port (CH2), set the network in the "Network Settings" in MES Interface Function
Configuration Tool. (MELSEC iQ-R MES Interface Module User's Manual (Application))
(2)
(2) (2)
(4)
(3)
(3)
5 SYSTEM CONFIGURATION
5.1 System Configuration
5
73