Specifying Center Binding - Konica Minolta BIZHUB C352P User Manual

Loading copy paper

Specifying center binding

The paper that is fed out can be folded in half and stapled at two places
along the vertical center.
Note
The Fold & Staple settings are available only if the optional finisher and
saddle stitcher are installed.
!
Detail
In order for prints to be bound at the center or folded in half, all of the
following conditions must be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 257 mm and 431.8 mm.
Paper Weight
2
50 g/m to 90 g/m
2
91 g/m to 209 g/m
Number of Bound Pages
Examples of the possible number of bound pages are listed below.
- 2 to 15 sheets of 90 g/m
- 1 sheet of 50 g/m
paper (maximum of 60 pages)
- Maximum of 13 sheets of 91 g/m
- Maximum of 10 sheets of 121 g/m
- Maximum of 8 sheets of 151 g/m
C352P (Phase 3)
Paper Size
2
A3 w, B4 w, A4 w, B5 w
2
2
paper (maximum of 60 pages)
2 2
to 209 g/m
Loading Capacity (detected in
either measurement)
200 sheets or 20 sets
—
paper + 14 sheets of 50 g/m
2 2
to 120 g/m paper
2 2
to 150 g/m paper
2 2
to 209 g/m paper
6
2 2
to 90 g/m
6-25