Loading Paper Into The Bypass Tray - Konica Minolta BIZHUB C352P User Manual

Loading copy paper

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, OHP transparencies or labels.
1
Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
? How is curled paper loaded?
% Flatten the paper before loading it.
3
Slide the lateral guides to fit the size
of paper being loaded.
Reminder
Do not load so many sheets that the top of the stack is higher than the
+ mark.
Push the paper guides firmly up against the edges of the paper.
When loading postcards, load them in the w orientation, as shown in the
illustration. Do not load postcards in the v orientation.
C352P (Phase 3)
6
Tray
extention
Lateral
guides
6-19