Printer Driver Settings (Windows 2000/Xp/Server 2003) - Konica Minolta BIZHUB C352P User Manual

Setting up the printer driver

Printer driver settings (Windows 2000/XP/server 2003)

When using Port 9100 to print, change the printer driver port to "9100".
1
For Windows 2000, click the [Start] button, point to "Settings", and
then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, click
Control Panel in the Start menu, click "Printers and Other
Hardware", and then click "Printers and Faxes".
2
Right-click the icon of the installed printer, and then click "Properties".
3
On the Ports tab, click the [Add Port] button.
4
In the "Available Printer Ports" list, select "Standard TCP/IP Port", and
then click the [New Port] button.
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6
In the "Name of printer or IP address" box, enter the IP address for this
machine, and then click the [Next] button.
7
Select "Custom", and then click the [Settings] button.
8
Click [RAW], and then enter the RAW port number (the default setting
is "9100") in the Port Number box.
9
Click the [Next] button, and then click the [Finish] button to apply the
setting.
Note
If the RAW port is not specified to be used in the TCP/IP setting, printing
cannot performed.
C352P (Phase 3)
3
3-45