Specifying printer driver settings
3
Select the desired setting from the "Paper Type" drop-down list, and
then click the [OK] button.
Only the paper types that can be selected for each paper tray are
displayed.
–
If "Transparency" is selected as the paper type, you can specify
transparency interleaving.
–
When the "Transparency Interleave" check box is selected, the
Transparency Interleave Settings dialog box appears, allowing you
to select the source of the interleaf paper.
–
The Transparency Interleave Settings dialog box can also be
displayed by clicking the [Settings] button.
Note
"Thick 1", "Thick 2", and "Thick 3" cannot be selected for Tray 2, Tray 3,
Tray 4, and LCT.
C352P (Phase 3)
4
4-15