Specifying Finishing Settings; Stapling Prints (Staple Settings) - Konica Minolta BIZHUB C352P User Manual

Loading copy paper
6.3

Specifying finishing settings

If the optional finisher is installed, the machine can be set to finish the pages
after printing them.
The Finishing settings can be specified from the printer driver.

Stapling prints (Staple settings)

!
Detail
In order for the prints to be stapled, all of the following conditions must
be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 148.5 mm and 431.8 mm.
Prints can be fed out stapled either in the corner or at two places.
Tray
Finishing tray 1
Finishing tray 2
Optional finishing tray
Number of Bound Pages
Examples of the possible number of bound pages are listed below.
- 50 sheets of 90 g/m
- 2 sheets of 209 g/m
- Maximum of 30 sheets of 91 g/m
Reminder
Prints can be fed out stapled either in the corner or at two places only
when the finisher is installed.
C352P (Phase 3)
Paper Weight Paper Size
2 2
50 g/m to 90 g/m A3 w to A5 w
2 2
91 g/m to 120 g/m
2 2
50 g/m to 90 g/m A3 w to A5 w
2 2
91 g/m to 120 g/m
2 2
50 g/m to 90 g/m A3 w to A5 w
2 2
91 g/m to 120 g/m
2
paper
2
paper + 48 sheets of 90 g/m
2
to 150 g/m
Loading Capacity
32 mm
A4 w or less: 132 mm
B4 w or more: 64.5 mm
24 mm
2
paper
2
paper
6
6-23