Konica Minolta BIZHUB C352P User Manual page 131

Setting up the printer driver
– Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select "Nprinter/Rprinter".
– Printer Name: Specify the printer name.
– Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is "Auto".
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that "C352P" (the created printer) is shown as "Waiting for
Job" for the connected printer (0).
Note
For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
Reminder
When the machine is turned off, then on again, wait at least 10 seconds
to turn the machine on after turning it off. The machine may not operate
correctly if it is turned on immediately after being turned off.
C352P (Phase 3)
3
3-59