Konica Minolta BIZHUB C352P User Manual page 133

Setting up the printer driver
– IPX Setting: Select "ON".
– Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select "Pserver".
– Print Server Name: Specify the print server name created in step 4.
– Print Server Password: Specify only when setting from the NetWare
server. (Displayed by "----".)
– Polling Interval: Specify "1". (Change as necessary.)
– Bindery/NDS Setting: Select "NDS".
– NDS Context Name: Specify the name of the context that connects
to Pserver.
– NDS Tree Name: Specify the name of the tree that Pserver logs on
to.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection col-
umn, check that the created Pserver is connected.
Note
For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
Reminder
When the machine is turned off, then on again, wait at least 10 seconds
to turn the machine on after turning it off. The machine may not operate
correctly if it is turned on immediately after being turned off.
C352P (Phase 3)
3
3-61