Konica Minolta BIZHUB C352P User Manual page 137

Setting up the printer driver
3
Enter the administrator password, and log in to the Administrator
mode.
4
On the Network tab, click "AppleTalk Setting".
5
Specify settings for the following:
AppleTalk: Set whether to use AppleTalk. Select "ON" here.
Printer Name: Specify the printer name (up to 31 alphanumeric
characters).
Zone Name: Specify the zone being connected to (up to 31
alphanumeric characters).
6
To apply the settings, restart this machine (turn it off, then on again).
Reminder
When the machine is turned off, then on again, wait at least 10 seconds
to turn the machine on after turning it off. The machine may not operate
correctly if it is turned on immediately after being turned off.
C352P (Phase 3)
3
3-65