Specifying The Tcp/Ip Settings - Konica Minolta BIZHUB C352P User Manual

Setting up the printer driver

Specifying the TCP/IP settings

First, assign the IP address from the machine's control panel.
1
Press the [Menu/Select] key on this machine's control panel, touch [+]
or [,] to display the Admin. Setting screen, and then touch [)].
2
Enter the administrator password, and then press the [Menu/Select]
key.
– To enter the password, touch [+] or [,] to select the desired value,
and then touch [*] [)] to enter the next digit.
3
Touch [+] or [,] to display the Network Setting screen, and then touch
[)].
4
Touch [+] or [,] to display the TCP/IP screen, and then touch [)].
5
Specify settings for "TCP/IP Setting" and "IP Address".
– Touch [+] or [,] to display the setting, and then touch [)] to switch
to the setting display. To change the setting, press the [+] or [,]
key.
To enter a numeric value, press the [+] or [,] key to change the
number of one digit at a time, and press the [*] or [)] key to move
to a different digit. After entering all digits, press the [Menu/Select]
key.
– TCP/IP Setting: Select whether or not TCP/IP is used.
C352P (Phase 3)
3
3-35