2
Setting the IP address for this machine
Use this machine's control panel to assign an IP address to this machine.
Note
When specifying network settings, follow the instructions of the network
administrator.
The administrator password is required in order to enter Administrator
mode. Ask the administrator of this machine for the administrator pass-
word.
Specifying the TCP/IP settings
1
Press the [Select] key on this machine's control panel, touch [+] or [,]
to display the Admin. Setting screen, and then touch [
2
Enter the administrator password, and then press the [Select] key.
–
To enter the password, touch [+] or [,] to select the desired value,
and then touch [
3
Touch [+] or [,] to display the Network Setting screen, and then touch
)
[
].
4
Touch [+] or [,] to display the TCP/IP screen, and then touch [)].
5
Specify settings for the IP address, subnet mask, and default gateway.
–
Touch [+] or [,] to display the setting, and then touch [
to the setting display. To enter a numeric value, touch [+] or [,] to
select the desired value, and then touch [
After entering all digits, press the [Select] key to apply the setting.
–
IP Address: Specify the IP address of this machine.
–
Subnet Mask: Specify the subnet mask connecting to a network.
2-30
*
)
] [
] to enter the next digit.
Setting up the printer driver
)
].
)
] to switch
)
] to enter the next digit.
C450P