Konica Minolta BIZHUB PRO 1050 User Manual page 439

Font
Screenfonts Installation procedure
How to install PostScript Type1 fonts under Windows 98/Me/NT 4.0
In order to use PostScript Type 1 fonts in Windows 98/Me/NT 4.0, you must
first install Adobe Type Manager (ATM), and then install the fonts through
ATM. ATM version 4.0 or higher is required for Windows 98/Me/NT4.0.
If ATM is not installed, you will need to install an ATM compliant to your OS
using the "PS-502 CD-ROM".
If ATM version is lower than which mentioned above, you must first uninstall
the lower ATM, and then install adequate ATM.
How to install PostScript Type1 in Windows 2000/XP/Server 2003
Windows 2000/XP/Server 2003 supports PostScript Type 1 fonts at the
system level just like TrueType fonts. You do not need to install ATM.
1
Choose [Start] - [Setting] - [Control Panel].
2
Double-click on the [Fonts] icon.
3
Go to the [File] menu, select [Install new font].
4
In the [folders] pane at the lower left, navigate to the location
"\EN\Screenfonts\PS Screen Fonts\Type 1 Fonts" folder on the
"PS-502 CD-ROM".
5
Click on [Select all].
6
Click on [OK].
bizhub PRO 1050/1050e/1050P/1050eP
10
10-15