Adjustment; Print Density; Smoothing - Type - Konica Minolta BIZHUB PRO 1050 User Manual

6

6.16.3 Adjustment

Adjustment - Slider A
Item
Adjustment - Slider B
Item

6.16.4 Print Density

Determines the print density of a graphic.
If a graphic appears too dark, move the slider towards [Light]. If the graphic
appears too light, move the slider towards [Dark]. The default setting is
[Normal].

6.16.5 Smoothing - Type

Prints the curved section of characters and images smoothly, when this
printing system is used.
- [Type 1] is suitable for printing the diagonal lines of normal characters
and graphics.[Type 2] is suitable for printing the curved sections of
normal characters.[Type 3] is suitable for printing the curved sections of
ornamental writings and fine characters.
- When [Off] is selected, no smoothing operation is made.
6-84
KONICA MINOLTA PS Printer Driver setting (Windows)
Description
If the graphic appears too bright, slide the brightness slider to the left.
If the graphic appears too dark, slide the brightness slider to the right.
Description
To decrease contrast, slide the contrast slider to the left.
To increase contrast, slide the contrast slider to the right.
Smoothing
bizhub PRO 1050/1050e/1050P/1050eP