Konica Minolta BIZHUB PRO 1050 User Manual page 278

6
Per Page Setting - Add
Adds Per Page Setting.
When click this button, the [Per Page Setting] dialog appears.
Item
Page Number
Number of Sheets
Print Type
Paper Source
Staple
Finish Stapling
Hole-Punch
6-56
KONICA MINOLTA PS Printer Driver setting (Windows)
Description
Enters the page number (1 to 9999) which you want to set in the Per
Page Settings. Multiple page numbers can be entered. When entering
multiple page numbers, use commas to separate them as in this exam-
ple: [2,4,6]. A range can be specified with a hyphen as in this example:
[6-10].
The number of sheets of paper output from the PI Tray 1 or PI Tray 2
can be set in the range of 1 to 20. However, the output from the PI Tray
is restricted only when [Print Type] is [Insert Blank Sheet].
As a print type of the Per Page Settings, specify either [Insert Blank
Sheet], [Print (Single-Sided)] or [Print (Double-Sided)].
Specifies the paper feed tray to be used in the Per Page Settings.
Selecting [Same as Body] sets the same one as that set in [Paper
source] of the [Setup] tab.
A setting is made to decide if the Per Page Settings are stapled or not.
When [Same as Body] is selected, the setting is the same one as that
set in [Staple] of the [Setup] tab.
Specifies the last page to be stapled.
Configures the punch to be set as the Per Page Settings.
bizhub PRO 1050/1050e/1050P/1050eP