Tab Image Shift - Konica Minolta BIZHUB PRO 1050 User Manual

KONICA MINOLTA PS Printer Driver setting (Windows)

6.13.11Tab Image Shift

This function is used to print the print content of the tab section edited in the
original on the tab section of the Tab Paper.
The shift of 10 to 15 mm (at intervals of 0.1 mm) is available only in the right
direction.
When setting the tray in which the Page Number and the Tab Paper are set
in [Per Page Setting] (page 6-54), the relevant page is shifted to the right by
the specified shift amount.
However, since there is no function provided to specify the position of the
tab, it is necessary to set up in advance the correct print information at the
tab position.
!
Detail
The original sizes that can be used for this function are limited to A4 and
Letter.
It is necessary that the tray has been set on the copier side.
Even if a shift is made, the original is not enlarged or reduced.
The combined use with [Image Shift] (page 6-64) is available.
(When this function is turned on, the setting of [Image Shift] is applicable
only to those other than the Tab Paper.)
The movement of 10 -15 mm to
the right is available.
bizhub PRO 1050/1050e/1050P/1050eP
Tab
Moving allows printing on the
Tab section.
6
6-75