Konica Minolta BIZHUB PRO 1050 User Manual page 294

6
Cover Print 3 in 1
After cutting and pasting automatically the first page of the original on the
front cover, the last page but one (n - 1 page) on the back cover, and the last
page (n page) on 3in1 as the spine, the front cover is printed.
And the second page up to the last page but two (n - 2 page) are printed as
the body of documents.
And it is necessary to set in advance the width of the spine to the paper
thickness. The setting can be made in units of 0.1 mm with the setting range
between 1 to 30 mm.
Note
The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for
[Cover Print 3in1].
Ex.: When using [Cover Print 3in1] for the perfect binding.
Perfect Binding cannot be set in the following cases:
- When [PB-501] is not selected in [Option] tab.
6-72
KONICA MINOLTA PS Printer Driver setting (Windows)
Cover Print 3 in 1 (Both Sides)
bizhub PRO 1050/1050e/1050P/1050eP