Konica Minolta BIZHUB PRO 1050 User Manual page 410

8
Output - Output Method - Wait Mode/Proof and Print
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
2
Select [Security] from pop-up menu.
3
Select [Wait Mode] or [Proof and Print] in the [Output Method].
4
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one part is printed and
it stops.
– When the Mode Check screen is not displayed, press [MACHINE]
tab.
On the copier's control panel, the Mode Check screen appears.
5
Confirm the current settings.
– If you do not change any setting, proceed to the step 8.
8-42
PostScript PPD Printer Driver setting (Mac OS X)
bizhub PRO 1050/1050e/1050P/1050eP