Konica Minolta BIZHUB PRO 1050 User Manual page 266

6
Output - Output Method - Wait Mode/Proof and Print
Outputs the test printing and checks the current setting from the control
panel of copier. Use this when printing a large volume document, such as
multiple sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Properties] to open the [Printing Preferences] window.
3
Select [Wait Mode] or [Proof and Print] in the [Output Method].
4
Click [OK] to close the [Printing Preferences] window.
5
Click [Print] to perform printing from the application.
– When [Wait Mode] is selected, it stops without being printed.
– When [Proof and Print] is selected, only one set is printed and it
stops.
– When the Mode Check screen is not displayed, press [MACHINE]
tab.
On the copier's control panel, the Mode Check screen appears.
6-44
KONICA MINOLTA PS Printer Driver setting (Windows)
bizhub PRO 1050/1050e/1050P/1050eP