Specifying Settings For Receiving Long Documents (Mode 007) - Konica Minolta bizhub FK-503 User Manual

11

Specifying settings for receiving long documents (mode 007)

Specify how long documents that are received are printed. The received
document can be automatically reduced or the excess can be discarded.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5
11-72
7 6 5 4 3 2 1 0
1 0 1 1 0 1 0 1 (HEX: B5)
Description
When the received document
is longer than the printable
area of the paper, if the excess
is shorter than the length
specified here, it is discarded.
(If it is longer, the document is
either reduced or split onto
different pages.)
When reducing the document
• The document is reduced if
the excess fits within the re-
duction ratio range speci-
fied by bits 2, 3 and 4 with
bit 1 set to "0".
When splitting the document
• The excess is printed on a
separate page if it does not
fit within the reduction ratio
range specified by bits 2, 3
and 4 with bit 1 set to "0".
• The excess is printed on a
separate page if bit 1 is set
to "1".
Setting Description
000 0 mm
001 8 mm
010 12 mm
011 14 mm
100 18 mm
101 20 mm
110 24 mm
111 *Do not specify
these settings.
Page Refer-
ence
p. 6-3
bizhub 350/250