Index - Konica Minolta bizhub FK-503 User Manual

Transmitting by a One-touch Key
Perform the following procedure after storing the destination number
beforehand in the one-touch keys.
1
Press [Fax/Scan] on the control panel to open the fax screen.
– The recipient must have been registered with a one-touch dial but-
ton in advance. For details, refer to "Programming a one-touch dial
button" on page 10-4.
– If desired, press [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Setting transmission con-
ditions" on page 3-9. For details on the settings available on the
FAX Menu screen, refer to "Transmission applications" on
page 7-3.
2
Press [One-Touch].
3
Press the desired one-touch dial but-
ton.
– Press the index tabs and [
and [
touch dial button.
– If you touch a key mistakenly,
pressing the same key again will
release it.
The selected button is highlighted. To select multiple recipients, con-
tinue selecting the desired one-touch dial buttons.
4
Place the original on the machine.
5
Press [Start].
Scanning of the document begins, and then the fax is sent.
If multiple recipients were selected, the Dest. tab of the Check Job De-
tails screen appears so that the selected destinations can be checked.
For details, refer to "Transmitting to Multiple Destinations" on
page 3-26.
Note
To stop the transmission, press the [Stop] key. For details, refer to "Stop-
ping the transmission" on page 3-33.
bizhub 350/250
] to find the desired one-
]
3
3-21