7.2
Header information
Register the sender name and the fax ID.
Item
Sender Name
Sender Fax No.
Header information
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [TSI] on the Set 1screen.
4
Select the transmission source
name, and then press [Enter].
–
To cancel the function, press
[OFF].
5
Designate the destination. Set the
original document.
6
Press [Start].
The transmission source information is printed.
bizhub 350/250
Description
The name registered is printed on the docu-
ment received by the other party as a sender
information.
The fax ID registered is printed on the docu-
ment received by the other party as a sender
information.
The fax number of the machine is normally en-
tered.
Available value
Up to 30 in characters and
symbols.
Up to 20 characters with 0
to 9, +, space, * and #
used.
7-7
7