Specifying Settings For Fax Reception Functions (Mode 030) - Konica Minolta bizhub FK-503 User Manual

Specifying settings for fax reception functions (mode 030)

Specify whether or not rotation or 2in1 printing is used with received faxes.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5
4
3, 2, 1, 0
(*) If rotation printing is specified, you can specify whether or not crosswise
sorting is performed if a remote copy fax is received.
bizhub 350/250
7 6 5 4 3 2 1 0
1 0 1 1 0 0 0 0 (HEX: B0)
Description Setting
----------------------- 1
Specifies whether or 00
not rotation printing
01
is used with re-
ceived faxes. (*)
10
11
Specifies whether or 0
not 2in1 printing is
used with received
1
faxes. (*)
----------------------- 0000
Description
*Do not change these
bits.
Does not rotate
Rotates (Does not sort
crosswise if a remote
copy fax is received)
Rotates (Sorts crosswise
if a remote copy fax is re-
ceived)
*Do not specify these set-
tings.
2in1 printing is not used
with received faxes
2in1 printing is used with
received faxes
*Do not change these
bits.
11
Page Refer-
ence
----------
p. 4-6
p. 4-6
----------
11-79