Specifying Settings For Administrator Forwarding (Mode 198) - Konica Minolta bizhub FK-503 User Manual

Specifying settings for administrator forwarding (mode 198)

Specify whether or not transmitted documents are sent to the recipient spec-
ified as the administrator after transmission.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5, 4
3, 2, 1, 0
(*) Available only if bit 7 of mode 198 is set to send.
bizhub 350/250
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0 (HEX: D0)
Description Setting
Specifies whether or 0
not transmitted doc-
1
uments are sent to
the recipient speci-
fied as the adminis-
trator after
transmission.
----------------------- 1
Specifies whether or 00
not the result report
01
is printed when doc-
uments are forward-
10
ed to the
administrator. (*)
Others
----------------------- 0000
Description
Does not send
Sends
*Specify this bit with the
scanner function.
Does not print
If transmission fails
Normally prints
*Do not specify any set-
tings other than those
mentioned above.
*Do not change these
bits.
11
Page Refer-
ence
p. 11-48
----------
p. 11-48
----------
11-81