Konica Minolta bizhub FK-503 User Manual page 125

7.11
Transmitting while Scanning the Original (Real-time Transmission)
When real-time transmission is designated, it is possible to read documents
one page at a time to match the transmission state.
Transmitting while Scanning the Original (Real-time Transmission)
0 When the "Quick Scan TX" function is selected, the document should be
loaded into the ADF. Transmission is not possible by positioning the doc-
ument on the original glass.
0 Real-time transmission cannot be used during transmission or reception.
0 Multiple destinations cannot be designated in real-time transmission.
0 Real-time transmission cannot be set at the same time as 2in1 transmis-
sion, double-sided transmission and time designed transmission.
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [FAX], and then [Quick Scan
TX].
– To cancel the function, press the
button again to deselect it.
[Quick Scan TX] is highlighted.
4
Designate the destination. Set the
original document.
5
Press [Start].
bizhub 350/250
7
7-21