Konica Minolta bizhub FK-503 User Manual page 39

No. Part name
7 [Reset] key
8 [Interrupt] key
9 [Power] (auxiliary power)
key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 [Proof Copy] key
14 Keypad
15 [C] (clear) key
16 [Mode Check] key
17 [Utility/Counter] key
18 [Mode Memory] key
19 Contrast dial
20 [Enlarge Display] key
21 [Accessibility] key
Reminder
Never push down on the touch panel with force, and never use a hard or
pointed object to make a selection in the touch panel.
bizhub 350/250
Description
Press to clear all settings (except programmed settings)
entered in the control panel and touch panel.
Copy screen is displayed after scanning original docu-
ments. Then It change to the interrupt mode. While the ma-
chine is in interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in interrupt
mode." appears on the touch panel. To cancel interrupt
mode, press the [Interrupt] key again.
Press to turn the control panel on or off. When the [Power]
(auxiliary power) key is turned off, the machine enters a
state where it conserves energy.
Fax transmission is stopped.
Fax transmission starts.
Lights up in green when the machine is turned on with the
[Main power] button.
Not used for fax mode.
Use to type in the number. It can be used at the time of reg-
istration of a fax number and data.
Use to type in the number of copies, zoom ratio, various
settings.
Press to erase a setting (such as the zoom ratio or size)
selected using the keypad.
Press to display a list of all specified settings. From this list,
the screen to specify each setting can be displayed and the
setting can be changed.
Used to display the Utility screen.
Not used for fax mode.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user accessibility
functions. For details, refer to the "User's guide – Copy op-
erations".
2
2-7