Operations While Scanning; If Document Size Cannot Be Detected; If Memory Became Full - Konica Minolta bizhub FK-503 User Manual

3.8

Operations while scanning

If document size cannot be detected

If the size of the document cannot be detected, the document cannot be
scanned.
If this occurs, press [Reduction/Area], then [Set Original Size], and then
specify the size.
!
Detail
For details on the settings available on the Quality & Reduction screen,
refer to "Setting transmission conditions" on page 3-9.

If memory became full

If many documents are stored in the memory ("Memory Free" is nearly 0%),
it may not be possible to send the fax. In addition, if the document contains
many pages or if the data is large, such as when the document contains
many fine details, the memory may become full and the fax cannot be sent.
If this occurs, clear some of the memory or send the "Quick Scan TX" func-
tion.
!
Detail
For details on the "Quick Scan TX" function, refer to "Transmitting while
Scanning the Original (Real-time Transmission)" on page 7-21.
Note
If the fax could not be sent, you can send it again since it remains in the
memory. This data can be deleted to clear some of the memory.
bizhub 350/250
3
3-31