Basic Screen (Layer Selection Screen); Basic Screen (Direct Selection Screen) - Konica Minolta 7065 Instruction Manual

Touch Screen (continued)

Basic Screen (Layer Selection Screen)

The 7065 Layer Selection Screen is the default basic screen. To switch the default basic
screen to the Direct Selection Screen, contact your service representative.
The Basic Screen includes a two-line message bar at the top; a user-interactive portion
in the centre; and mode keys at the bottom for selecting Copy Mode, Copy Density, Lens
Mode and Paper Size. This screen enables you to use touch keys on the screen as well
as conventional keys to select modes, function, settings, paper trays, etc. After warm-up,
copying conditions may be set in the Initial Setting Menu of the Key Operator Mode.

Basic Screen (Direct Selection Screen)

While the Layer Selection Screen displays subsequent screens when each mode key is
pressed, the Direct Selection Screen displays only one screen that shows the mode options
and also registers the selections you make. The Direct Selection Screen does not display
the Full-Automatic Mode Screen.
Basic Screen
Basic Screen (Direct Selection Screen)
Section 3 : Machine Information
3
Machine
Information
Control Panel/
Touch Screen
3 - 9