Konica Minolta 7065 Instruction Manual page 243

Weekly Timer [8] (continued)
Timer Setting [4] (continued)
4 When the screen is displayed, the hour section of ON-hour of Monday is highlighted.
Input the hour using touch screen keypad, and touch SET . (Setting example: 6 p.m.
is 18.)
Touching SET repeatedly will shift the input section from Monday ON-hour, Monday
ON-minute, Monday OFF-hour, Monday OFF-minute, Tuesday ON-hour e.g.
Input the year using touch screen keypad, and touch OK .
NOTES:
1 If ON-time and OFF-time are the same, power will not go on.
2 If the setting is 00:00~00:00 you will not be able to set the copiers off/on condition for specific
days.
When setting Sunday OFF-minute, Monday ON-hour is highlighted again. Proceed
to step 6.
5 To set the Block ON/OFF time for all days of the week, touch Block timer setting to
display the Block Timer Setting Screen.
6 When the Block Timer Setting Screen is displayed, the On and OFF times are initially
set at 00:00~00:00. Input the hour and minutes using the control panel keypad, and
touch SET after each entry.
7 If no further changes are required, proceed to step 10.
8 If other Weekly timer settings are required, touch PREVIOUS SCREEN to return to
the Weekly Timer Setting Menu Screen. Select another desired menu item, from
[1]~[7].
9 If no other Weekly timer settings are required, touch PREVIOUS SCREEN to restore
the Key Operator Mode Screen.
10 Turn power OFF.
11 Turn the copier power switch back ON to perform copying operations.
Section 12 : Key Operator Mode
Weekly Timer
12
Key Operator
Mode
12 - 37