Konica Minolta 7065 Instruction Manual page 184

Section 9 : Applications
Frame/Fold Erasure (continued)
3
Position Originals ... FACE UP in RADF
Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
Hint:
When using Platen memory copy, position original(s) on the platen glass and press [STORE] to
scan. See p. 6-26 ~ p. 6-27.
When using RADF memory copy, position original(s) in the document feeder and press [STORE]
to scan. See p. 6-28 ~ p. 6-29.
Option:
Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return
to the Basic Screen. See p. 6-36 to p. 6-39.
4
Start Copying
Press [ START PRINT ].
To delete the scanned data without printing, press [ STOP/
CLEAR ].
To reset the copying conditions to the initial setting, press
[ STOP/CLEAR ] then [ AUTO RESET ].
After copying is completed, touch Frame/Fold Erasure on
the Application Selection Screen or press [ AUTO RESET ]
to release the mode and reset the machine.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to the print quantity selected,
remove the copied sets as they exit; otherwise, mishandled paper will occur.
9 - 42
FACE DOWN on Platen Glass
PRINT QUANTITY
INTERRUPT
PROOF COPY
START PRINT
RECALL CLEAR QTY.
ST