Table of Contents
Advertisement
Section 3 : Machine Information
Lead Edge Delete
When using the RADF, image deletion of a few millimeters will occur on the lead edge for
the purpose of controlling copy quality and copy reliability, unless deactivated by the key
3
operator. See p. 12-42 to p. 12-46.
Machine
Information
Service Settings
The following functions can be provided by your Konica service representative, who is
authorized to change DIP switch settings. Contact your service centre if setting change is
required.
Automatic
Settings
Finisher-Paper Capacity
In the default condition, the 7065 will produce unlimited sets. If required, service can set
the copier to stop copying when the number of copies exceeds specified capacity.
Key Operator Password
Service can set a 4-digit Key operator password to access the Key Operator Mode Screen.
After this setting, a Password Entry Screen will display and require entry of the Key operator
password to access the Key Operator Mode Screen.
EKC Master Key Code
Service can set an 8-digit EKC master key code to access the EKC Setting Menu Screen.
After this setting, the EKC Master Key Code Screen will be displayed and will always
require entry of the set EKC master key code to access the EKC Setting Menu Screen.
Weekly Timer Master Key Code
Service can set a 4-digit Weekly timer master key code to access the Weekly Timer
Setting Menu Screen. After this setting, the Weekly Timer Master Key Code Screen will
be displayed and will always require entry of the set Weekly timer master key code to
access the Weekly Timer Setting Menu Screen.
Weekly Timer Key in Help Screen
Service can set the copier with weekly timer system to display the Weekly timer key on the
Help Screen to check and see the contents of Weekly timer settings.
Control Panel Contrast Key in Help Screen
Service can set the copier to display Control panel contrast key on the Help Screen to
display the Contrast Adjustment Screen for adjusting panel contrast.
3 - 11
Advertisement
Table of Contents
Troubleshooting
