Using The Timers - Panasonic SC-VK450 Operating Instructions Manual

Using the timers

Setting the time
This is a 24-hour clock.
1
Select "CLOCK".
Every time you press the button:
CLOCK PLAY
➞
Previous display
Display the time
Press [CLOCK/TIMER] once when the unit is
on or at standby mode.
The time is shown for a few seconds.
The play/record timer
You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station or from the music
port source (record timer).
The play and record timers cannot be used together.
Preparation
• Turn the unit on and set the clock.
• For the play timer, prepare the desired music source; cassette (DECK 2 has the priority), disc number (1 ~ 5), radio or
music port source, and set the volume.
• For the record timer, check the cassette's erasure prevention tabs (
( page 24) and tune to the radio station (
1
Select the timer function.
Every time you press the button:
PLAY
CLOCK
➞
Previous display
PLAY: to set the play timer
REC: to set the record timer
(Proceed to the next step within 7 seconds)
4
Display the timer indicator.
Every time you press the button:
PLAY REC
➞
(off)
PLAY: to turn the play timer on
REC: to turn the record timer on
(The indicator does not appear if the start and finish
times or the clock has not been set.)
2
(within 7 seconds
REC
➞
page 22) or select the music port source (
2
REC
➞
3
or so)
Set the time.
Note:
Reset the clock regularly to maintain accuracy.
page 24) and insert the tape in DECK 2
Set the ON time.
5
Turn the unit off.
The unit must be off for the timers to operate.
• Play timer:
Play will start in the set condition at
the set time with volume increasing
gradually to the set level.
• Record timer: The unit comes on 30 seconds before
the set time with the volume muted.
Finish the setting.
page 29).
3
Proceed to set the OFF time.
• Repeat steps 2 and 3 to set
the OFF time.
27
27