Table of Contents
Advertisement
FM radio
30 FM stations can be preset.
Preparation
Press [RADIO, EXT-IN] repeatedly to select "FM".
Automatic presetting
1
Press [RADIO MENU] to select "A.PRESET".
2
Press [2, 1] to select "LOWEST" or
"CURRENT" frequency.
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.9 or FM 87.5).
CURRENT:
To begin auto preset with the current frequency*
3
Press [OK] to start presetting.
• The tuner starts to preset all the stations it can receive
into the channels in ascending order.
To cancel, press [∫].
*1: To change the frequency, refer to "Manual tuning and
presetting".
Manual tuning and presetting
1
Press [6] or [5] to tune in to the station.
• Alternatively, press [:/6] or [5/9] on the
main unit when "MANUAL" is selected as the tune
mode*
.
2
To tune automatically, press and hold the button until
the frequency starts changing quickly.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on the main
unit when "PRESET" is selected as the tune mode*
*2: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "MANUAL" or "PRESET", and
then press [OK].
To display the current FM signal status
Press [DISPLAY].
"FM ST":
FM stereo broadcast is being received.
"FM - - - -":
No broadcast is received or FM broadcast
received is weak or in monaural.
"FM MONO": You have set the "FM MODE" to "MONO".
( 11, "If noise is excessive during FM
reception.")
Note:
• "STEREO" is displayed when this unit tunes to a stereo
broadcast.
Clock and timers
.
1
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
• Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
-.
"SLEEP 30"
"SLEEP 60"
^-------------------
"OFF" (Cancel)
Note:
• The remaining time is indicated on the unit's display at
every minute except when other operations are performed.
"SLEEP 1" is always shown when only 1 minute remains.
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
.
2
Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
2
3
4
Turning the timer on
1
2
To check the settings
Press [CLOCK/TIMER] repeatedly to select "TIMER
ADJ".
(During standby, press [CLOCK/TIMER] twice.)
Note:
• The timer starts at a low volume and increases gradually to
-.
-.
"SLEEP 90"
"SLEEP 120"
(------------------b
• The timer comes on at the set time every day if the timer is
• If you switch off the system and switch on again while a
*3: "CD", "USB", and "FM" can be set as the music source.
Press [CLOCK/TIMER] repeatedly to select
"TIMER ADJ".
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
Press [3, 4] to select the music source*
then press [OK].
Prepare the selected music source and set the
desired volume.
Press [F, PLAY].
"F" is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to
operate.
the preset level.
on.
timer is in operation, the timer will not stop at the end time.
• For timer music source through the port for iPhone/
iPad/iPod and USB devices, select "USB".
and
3
9
Advertisement
Table of Contents
