Clock And Timers - Panasonic SA-PMX82M Operating Instructions Manual

DAB/DAB+ manual tuning
To find the best antenna position, use manual tuning to
search selected DAB/DAB+ frequency block.
1
Press [RADIO MENU] repeatedly to select
"MANUAL SCAN".
2
Press [2, 1] to select a frequency block to scan
and then press [OK].
Memory presetting
You can preset up to 20 DAB/DAB+ stations.
1
Press [6] or [5] to select a station.
• Alternatively, press [:/6] or [5/9] on this
unit when "STATION" is selected as the tune mode*
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
• Previous station memory is cleared during auto scan.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on this unit
when "PRESET" is selected as the tune mode*
*1: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "STATION" or "PRESET", and
then press [OK].
10
Viewing available information
You can view information about the DAB/DAB+
broadcast, programme type, ensemble label, frequency
and time.
Press [DISPLAY] to view available information.
DAB/DAB+ settings
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB SECONDARY
1 .
PRIMARY To listen to primary service.
SECONDARY To listen to secondary services.
" " is shown.
AUTO CLOCK ADJ
ON ADJUST Start auto clock adjustment.
OFF ADJUST Cancel auto clock adjustment.
DAB/DAB+ signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select
"SIGNAL QUALITY".
2
Press [2, 1] to select frequency.
The current frequency block is displayed and then
1 .
the reception quality is indicated.
Reception quality
0 (poor) to 8 (excellent)

Clock and timers

Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
• Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
-. -.
"SLEEP 30" "SLEEP 60" "SLEEP 90"
^------------------- (------------------b
"OFF" (Cancel)
Note:
• The remaining time is indicated on the unit's display at
every minute except when other operations are performed.
"SLEEP 1" is always shown when only 1 minute remains.
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
"TIMER ADJ".
2
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
4
Press [3, 4] to select the music source*
then press [OK].
-.
"SLEEP 120"
1 and