Table of Contents
Advertisement
2.2. Windows Vista & Server 2008 64 & 32 bit installation
Note: Images below show a PX-260 4 Port RS-232 device as an example. The same installation steps
can be applied to all other products in the PX PCI Express range.
1. Turn off the PC (unplug from power socket) and insert the PCI Express Card into a free PCIe slot.
2. Turn the PC on.
3. Insert the Boost.PCIe CD
4. The Found New Hardware Wizard will come up. If your computer is set to check Windows Update
Automatically for a driver, then it could take longer for this screen to pop up.
5. Select 'Locate and install driver software'.
6. NB Vista will enter the Security Check to ensure that you have initiated the installation (and not
some malicious program). Click Continue
PX Range Product Manual
Version 2.3 © Copyright Brainboxes Limited 2013
Page 10 of 45
Advertisement
Table of Contents
