Windows 7/Server 2008 R2 Installation - Brainboxes PX-101 Product Manual

2.3. Windows 7/Server 2008 R2 installation

Note: The following installation instructions use a PX-346, but the installation instructions are the
same for any PX card.
1. When you boot up your computer on Windows 7, Windows update will automatically search for the latest
drivers. If you have a connection to the internet, the drivers will be installed and the device will be ready
to use.
2. If there is no connection to the internet or the drivers can't be found, a message will appear to tell you
that device driver software was not successfully installed.
3. To install the drivers Device manager will need to be opened. To open device manager go to the control
panel, system, hardware tab, then click on the device manager button.
4. Once this is open you will see the yellow ! icon in the other devices node. Right click on the device and
click on update driver software.
PX Range Product Manual Version 2.3 © Copyright Brainboxes Limited 2013 Page 13 of 45