Advertisement
Available languages
Available languages
Properly leveling your w asher avoids excessive
noise a nd vibration.
1. Check t helevelness
ofthe washer byplacing a level onthetopedge o fthewasher, first
side toside, then front t oback.
(
1.
Check the electrical
requirements.
Be sure that you have the correct
electrical
supply
and
the recommended
grounding
method.
See "Electrical
Requirements."
2.
Check that all parts are now installed.
If there is an extra part, go back through
the steps to
see which
step was skipped.
3.
Check that you have all of your tools.
4.
Dispose
of/recycle
all packaging
materials.
5.
Check that the water faucets are on.
6.
Check for leaks around
faucets
and inlet hoses.
2.
3.
4.
5.
6.
If the washer
is against a wall,
move the washer out slightly
before tipping
back. If the
washer
is not [eve[, first prop the front with
a wood block
and adjust the feet as necessary;
then prop the back and adjust feet as necessary.
Repeat this step until washer
is [eve[.
Make sure all four feet are stable and resting on the floor. Then check that the appliance
is
perfectly
[eve[ (use a [eve[).
After the washer
is [eve[, use a 14 mm open-end
wrench
to turn the nuts on the feet tightly
against
the washer
cabinet.
IMPORTANT:
All four feet must be tightened.
If the nuts are not tight against the washer
cabinet,
the washer
may vibrate.
The washer
should
not move front to back, side to side, or diagonally
when pushed on its
top edges.
Slide the washer
to its final location.
Confirm
the levelness of the washer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7.
8.
Plug into a grounded
3 prong outlet.
To test and to clean your washe_; measure
V2the detergent
manufacturer's
recommended
amount
of HE High
Efficiency
detergent
for a medium-size
load. Pour the detergent
into
the detergent
dispenser.
Select any cycle and allow
the washer
to complete
one whole
cycle.
Advertisement
