Status Ess Clusters Field Descriptions - Avaya ESS User Manual

Figure 47: status ess clusters command example - ESS
status ess clusters
Cluster ID
Cluster
ID
60

status ess clusters field descriptions

Note:
The field definitions are the same whether the status ess command is
Note:
executed on a Main server or ESS server.
status ess clusters
Field
Cluster ID
(title line)
Cluster ID
(detail line)
60 ESS CLUSTER INFORMATION
Active
Server
Enabled? ID Registered?
y 90
Description
Cluster IDentifier (1 - 999). The cluster identifier of the server where
status ess was run. In a duplex server environment (
the active and the standby server have the same cluster ID. The cluster ID
is initially obtained from the license file (where it is called the Module ID or
MID). Once save translation is executed, the cluster ID is saved in
translations.
Cluster IDentifier (1 - 999). The cluster ID of a server who's state is known
to the server where status ess was run. The detail lines are shown in
cluster ID order.
When status ess is issued on a Main server there is one detail line for
the Main server itself and a detail line for every ESS server that is
registered with the Main server.
When status ess is issued on an ESS server there is only one detail
line since an ESS server only knows its own state.
Enterprise Survivable Servers - Maintenance Commands
Translations
Updated
y 11:02 3/7/2005
Software
Version
R013x.00.0.338.0
) both
S8700 | 8710
1 of 2
Issue 1.1 June 2005 155