Table 10: Installing ESS with existing servers (continued)
Task
6. ESS server: Install a
RFA license and
authentication file on each
ESS server
7. ESS server: Configure
the ESS server
Information
If the license file contains a
new module ID or if the
module ID has changed,
you must:
Use the Bash
●
command, server
-z
Use the SAT
●
command reset
system 4
If the license file contains
the same module ID as the
previous license file, with
the ESS functionality
turned on, you must:
Use the SAT
●
command, reset
system 4
After loading the license
file, verify that the ESS
Administration and
Enterprise Survivable
Server feature is turned on.
The server's web interface
is used to configure the
ESS server.
If the server was
re-mastered, use the Avaya
wizard to configure the
server.
If the server is already
configured, use the Avaya
Enterprise Survivable
Servers Users Guide to
configure the Enterprise
Survivable Server window.
ESS Installation Checklist
Documentation
To install the license and
authentication file see:
Installing and Configuring
●
the S8500 Media Server
(03-300143), or
Installing and Configuring
●
the S8700 Series Media
Server (03-300145).
To verify that the ESS
Administration and Enterprise
Survivable Server feature is
turned on see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide,
Server License Files
on
page 110.
To configure the server using the
Avaya wizard see:
Installing and Configuring
●
the S8500 Media Server
(03-300143), or
Installing and Configuring
●
the S8700 Series Media
Server (03-300145).
To configure a server with
existing configuration information
see:
Avaya Enterprise Survivable
Servers Users Guide,
media server to ESS server
page 137.
Issue 1.1 June 2005
ESS
Existing
on
4 of 10
97