Avaya ESS User Manual page 156

Maintenance
status ess clusters (continued)
Field
Enabled
Active Server ID
Registered
Translations
Updated
Software
Version
156 Avaya Enterprise Survivable Servers (ESS) Users Guide
Description
The ESS server enabled / disabled state of the server.
y = enabled. This server will connect to administered IPSIs
●
n = disabled. This server will not connect to administered IPSIs
●
unknown = the Main server does not yet know the maintenance
●
state of the ESS server. This may be because:
- The ESS server is not registered with the Main server
- The ESS server has not yet acknowledged a maintenance state
change request from the Main server via an enable ess or
disable ess command
The server identifier of the active server for each cluster, ESS server or
Main server:
(1 - 99).
If the server is a simplex configuration (
●
Server IDentifier.
If the server is a duplex configurations (
●
servers each have unique server identifiers. Because in a duplex
configuration only the active server registers with the Main server,
only its server identifier is displayed. Only server IDs for registered
ESS servers are displayed.
The registration state of the server.
y = registered
●
n = not registered
●
The Main server does not register with itself, but always displays its own
registration as y.
For an ESS server:
The time and date stamp of the latest translation update reported by
●
the ESS server to the Main server over the registration link.
For a Main server:
This is the time and date stamp of the latest successful save
●
translation command of any kind.
Note:
For a Main server this time stamp may be later than those
Note:
shown for ESS servers. A save translation on the
Main server updates its time stamp. A save
translation [ess | all] updates the ESS server
translations and time stamp.
The software version of Avaya Communication Manager running on the
server. For an ESS server, this is reported to the Main server over the
registration link.
) there is only one
S8500
) the A and B
S8700 | 8710
2 of 2