Wok Burner; The Wok Cradle - Falcon Professional+ 110 Dual Fuel with FSD User Manual & Installation & Service Instructions

When the igniter button is pressed in, sparks will be
made at every burner – this is normal. Do not attempt to
disassemble or clean around any burner while another
burner is on, otherwise an electric shock could result.
To light a burner, press the igniter button, and push in and
turn a knob to the high position indicated by the large flame
symbol ( ):

ArtNo.270-0001
Proplus control to high
Adjust the flame height to suit by turning the knob clockwise.
ArtNo.270-0003
Proplus control to low
If a burner flame goes out, turn the control knob off and
leave it for one minute before relighting it.
Ensure that the flames are under the pans. Using a lid will
help the contents boil more quickly.
ArtNo.311-0001 Right pans gas
Large pans should be spaced well apart.
Pans and kettles with concave bases or down turned base
rims should not be used:
ArtNo.311-0002 Pan with rim
Simmering aids, such as asbestos or mesh mats, are NOT
recommended. They will reduce burner performance and
could damage the pan supports:
��� ��� �������� ������ ����
You should also avoid using unstable and misshapen pans
that may tilt easily, and pans with a very small base diameter,
e.g. milk pans, single egg poachers.
ArtNo.311-0004 Tipping wok
The minimum recommended pan diameter is 120mm. The
maximum allowable pan base diameter is 250mm.

Wok burner

The Wok burner is designed to provide even heat over a large
area. It is ideal for large pans and stir frying.
ArtNo.311-0005 Wok burner & pan support
For heating smaller pans, the aforementioned hotplate
burners may be more efficient.
You can remove the burner parts for cleaning – see 'Cleaning
your cooker' .
You should wipe the enamel top surface of the cooker around
the hotplate burners as soon as possible after spills occur. Try
to wipe them off while the enamel is still warm.
Note:
The use of aluminium pans may cause metallic
marking of the pan supports. This does not affect the
durability of the enamel and may be cleaned off with an
appropriate metal cleaner.

The Wok cradle

The Wok cradle is designed to fit a Professional 35cm Wok
(available from our cookware collection – Part Code RM095).
If you use a different Wok, make sure that it fits the cradle.
Woks vary very widely in size and shape. It's important that
the Wok sits down on the pan support – however, if the Wok
is too small, the cradle will not support it properly.
3