Performance Specifications - FLIR D--Series Installation And Operation Manual

• Isopropyl alcohol (IPA)
Cleaning Procedure:
1. Saturate a piece of the lens tissue with the water and drape it over the lens. Let the
surface tension of the water pull the tissue onto the lens surface; then drag the tissue
across the lens surface. Repeat several times with different pieces of tissue.
2. Repeat the same procedure using IPA instead of water. Drag the final piece of tissue
over the lens several times to prevent pooling, which could leave a residue on the lens.

8. Performance Specifications

Performance
Camera Type
Sensor Type
Pixel Size
Spectral Band
Performance
Movement
Speed
Max. Preset Speed
Preset Point
Auto Scan
Patterns
Outputs
Analog Video
Power
Input Voltage
Power Consumption
Operation
Image Control
Time to Image
Environmental
Storage Temperature
Environment
Humidity
Scene Temp Range
Shock
Vibration
Operational Temperature
Default Settings
Baud Rate
Pelco ID Address
444-00001-00-10 Revision 110
Uncooled LWIR Thermal Imager
324x256 Vox Microbolometer
38 µm
7.5 – 13.5 µm
< 85mK NEdT at f/1.6
Pan: 0° – 360° Continuous Tilt: 0° – 90° (180° with flip)
Pan: 0.5° – 100°/S Tilt: 0.5° – 100°/S
100°/S
80
1 Route
1 Route, 200 Instructions
NTSC @ 30 Hz
PAL @ 25 Hz (optional)
9 Hz option for export (factory set)
24VAC±25%
• 20W
Invert, 2x digital zoom, AGC
~2 seconds
-40 – +85 °C external temp
in-ceiling, indoor only
only non-condensing
To 150 °C standard
70g shock pulse, 11ms half-sine profile
4.3 g ms random vibration for 8 hours (three axes)
0 0
-10 C to +50 C
2400 Baud
01
Copyright © 2008 FLIR Systems, Inc. Page 28 of 33