Warnings And Cautions - FLIR D--Series Installation And Operation Manual

1. Warnings and Cautions

CAUTION! This guide uses a yellow box with the word Caution to indicate a potentially
hazardous situation, which, if not avoided, may result in injury or damage to the device.
NOTE: This guide uses blue Note boxes to provide extra information on a topic.
1. A trained professional should install the camera in accordance with local codes and
industry-standard safe practices.
2. Disassembling the D-Series Camera for reasons other than installation, ordinary
maintenance or configuration can cause permanent damage and will void the warranty.
3. Operating the camera outside of the specified input voltage range or the specified
operating temperature range can cause permanent damage.
4. Follow the environmental guidelines included in the technical specifications required for
installation. Avoid exposure to dust and moisture.
5. Do not image extremely high intensity radiation sources, such as the sun, lasers, arc
welders, etc. This warning applies whether or not the system is powered.
6. The camera is a precision optical instrument and should not be exposed to excessive
shock and/or vibration.
7. This camera contains static-sensitive electronics and should be handled appropriately.
8. Do not install or operate the device in locations that contain flammable and/or explosive
objects.
9. Do not try to repair the unit by yourself. FLIR Systems shall not be responsible for any
problem caused by unauthorized amendment or repairing.
10. Take great care when handling your camera optics. They are delicate and can be
damaged by improper cleaning. Clean the lens in the manner described in Section 7.1
Caring for your FLIR D-Series
WARNING: All thermal imaging systems are subject to export control. Please contact FLIR
for export compliance information concerning your application or geographic area.
444-00001-00-10 Revision 110
Camera.
Copyright © 2008 FLIR Systems, Inc. Page 5 of 33